![]() | Mortar infill. |
![]() | Finnseal fitted using 1no 1.6 x 30mm nail per flange. |
![]() | Full depth blocking or minimum 38mm x 38mm perimeter noggin for floor deck support. Similar noggin may be required for ceiling edge support. Noggin to be set 15mm to 25mm from wall. Noggin skew nailed or fixed using Z clip. |
![]() | 90mm minimum bearing. Finnseal must not extend into cavity. Minimum 45mm bearing for internal walls. |
![]() | INSTALLATION NOTE: Ensure bearings are flat, level and that the Finnjoists or Kerto® are vertical. |